Ring Measurements
How to measure your ring size accurately
How do I measure ring size? This is perhaps the most commonly asked question while shopping for rings online. For this reason, we have an entire section dedicated to guiding you on how to measure your ring size. We feel it is important to state that when purchasing a wedding ring you should be 100% sure that the ring is the right one for you.
The best way of doing this is to get your finger measured by your local jeweler.
Ring Sizer
In order to print the ring sizer above, be sure that your printer is set to 100%. In other words, make sure that you have not reduced the print size in 'Page Setup'. You can verify that the sizer has printed correctly by measuring it with a ruler; it should measure from left to right: 3 3/8 inches.
Once you have printed the sizer, you need to cut it out and then use the following directions to find your ring size:
1. Wrap a piece of loose string around your finger. Be sure to allow for the size of your knuckle.
2. With a pen, mark the point on the string where the end meets.
3. Using the chart, place the end of the string on the left hand line next to the letter "A" and stretch the string along the sizer toward the numbers.
4. The pen mark on your string should line up with a number to indicate your ring size.
Below is a chart of ring sizes to help our international customers figure out how to measure ring sizes.
|
International Ring Size Chart |
| US & Canada Ring Size |
Diameter in Inches |
Great Britain |
France |
Germany |
Japan |
Switzerland |
| 000 |
0.390 |
--- |
--- |
--- |
--- |
--- |
| 00 |
0.422 |
--- |
--- |
--- |
--- |
--- |
| 0 |
0.454 |
--- |
--- |
--- |
--- |
--- |
| ½ |
0.462 |
A |
--- |
--- |
--- |
--- |
| ¾ |
0.471 |
A-½ |
--- |
--- |
--- |
--- |
| 1 |
0.487 |
B |
--- |
--- |
1 |
--- |
| 1 1/4 |
0.495 |
B-½ |
--- |
--- |
--- |
--- |
| 1 1/2 |
0.503 |
C |
--- |
--- |
--- |
--- |
| 1 3/4 |
0.511 |
C-½ |
--- |
--- |
--- |
--- |
| 2 |
0.520 |
D |
41 1/2 |
13 1/4 |
2 |
1 1/2 |
| 2 1/4 |
0.528 |
D-½ |
42 1/8 |
13 1/2 |
--- |
--- |
| 2 1/2 |
0.536 |
E |
42 3/4 |
13 3/4 |
3 |
2 3/4 |
| 2 3/4 |
0.544 |
E-½ |
43 3/8 |
--- |
--- |
3 3/8 |
| 3 |
0.553 |
F |
44 |
14 |
4 |
4 |
| 3 1/4 |
0.561 |
F-½ |
44 5/8 |
14 1/4 |
--- |
4 5/8 |
| 3 1/2 |
0.569 |
G |
45 1/4 |
14 1/2 |
5 |
5 1/4 |
| 3 3/4 |
0.577 |
G-½ |
45 7/8 |
14 3/4 |
6 |
5 7/8 |
| 4 |
0.586 |
H-½ |
46 1/2 |
15 |
7 |
6 1/2 |
| 4 1/4 |
0.594 |
I |
47 1/8 |
15 1/4 |
--- |
7 1/8 |
| 4 1/2 |
0.602 |
I-½ |
47 3/4 |
15 1/2 |
8 |
7 3/4 |
| 4 3/4 |
0.610 |
J |
48 3/8 |
--- |
--- |
8 3/8 |
| 5 |
0.619 |
J-½ |
49 |
15 3/4 |
9 |
9 |
| 5 1/4 |
0.627 |
K |
49 5/8 |
16 |
--- |
9 5/8 |
| 5 1/2 |
0.635 |
K-½ |
50 1/4 |
16 1/4 |
10 |
10 1/4 |
| 5 3/4 |
0.643 |
L |
50 7/8 |
--- |
11 |
10 7/8 |
| 6 |
0.652 |
L-½ |
51 1/2 |
16 1/2 |
12 |
11 1/2 |
| 6 1/4 |
0.660 |
M |
52 1/8 |
16 3/4 |
--- |
12 1/8 |
| 6 1/2 |
0.668 |
M-½ |
52 3/4 |
17 |
13 |
12 3/4 |
| 6 3/4 |
0.676 |
N |
53 3/8 |
--- |
--- |
13 3/8 |
| 7 |
0.685 |
O |
54 |
17 1/4 |
14 |
14 |
| 7 1/4 |
0.693 |
O-½ |
54 5/8 |
17 1/2 |
--- |
14 5/8 |
| 7 1/2 |
0.701 |
P |
55 1/4 |
17 3/4 |
15 |
15 1/4 |
| 7 3/4 |
0.709 |
P-½ |
55 7/8 |
--- |
--- |
15 7/8 |
| 8 |
0.717 |
Q |
56 1/2 |
18 |
16 |
16 1/2 |
| 8 1/4 |
0.726 |
Q-½ |
57 1/8 |
18 1/4 |
--- |
17 1/8 |
| 8 1/2 |
0.734 |
R |
57 3/4 |
18 1/2 |
17 |
17 3/4 |
| 8 3/4 |
0.742 |
R-½ |
58 3/8 |
18 3/4 |
--- |
18 3/8 |
| 9 |
0.750 |
S |
59 |
19 |
18 |
19 |
| 9 1/4 |
0.759 |
S-½ |
59 5/8 |
19 1/4 |
--- |
19 5/8 |
| 9 1/2 |
0.767 |
--- |
60 1/4 |
19 1/2 |
19 |
20 1/4 |
| 9 3/4 |
0.775 |
T |
60 7/8 |
19 3/4 |
--- |
20 7/8 |
| 10 |
0.783 |
T-½ |
61 1/2 |
20 |
20 |
21 1/2 |
| 10 1/4 |
0.792 |
U |
62 1/8 |
20 1/4 |
21 |
22 1/8 |
| 10 1/2 |
0.800 |
U-½ |
62 3/4 |
20 1/2 |
22 |
22 3/4 |
| 10 3/4 |
0.808 |
V |
63 3/8 |
--- |
--- |
23 3/8 |
| 11 |
0.816 |
V-½ |
64 |
20 3/4 |
23 |
24 |
| 11 1/4 |
0.825 |
W |
64 5/8 |
--- |
--- |
24 5/8 |
| 11 1/2 |
0.833 |
W-½ |
65 1/4 |
21 |
24 |
25 1/4 |
| 11 3/4 |
0.841 |
X |
65 7/8 |
--- |
--- |
25 7/8 |
| 12 |
0.849 |
Y |
66 1/2 |
21 1/4 |
25 |
26 1/2 |
| 12 1/4 |
0.858 |
Y-½ |
67 1/8 |
21 1/2 |
--- |
27 1/8 |
| 12 1/2 |
0.866 |
Z |
67 3/4 |
21 3/4 |
26 |
27 3/4 |
| 12 3/4 |
0.874 |
Z-½ |
68 3/8 |
--- |
--- |
28 3/8 |
| 13 |
0.882 |
--- |
69 |
22 |
27 |
29 |
What if I need my ring resized?
We can complete a resize for you, in order to do this you must return the ring to us along with your order number and the size you want the ring changed to. There is a charge of $35 for any resizeing done, this price includes the return delivery charge.
Please send all resizing orders to:
Celtic Rings Ltd8 Na Cluiante
Portarlington
County Offaly
Ireland.
About Us
